Cheddar Network Simulator: Devices

Version 1.05

One section per Add to map item; the model is chosen in Properties. T2 = needs Tier 2 or higher. T3 = needs Tier 3. Unmarked = all tiers.

WAN

  • Internet (far-end servers)
  • WAN terminal, with these services:
    • Satellite, LEO (T3): OneWeb class (Gogo Galileo FDX), Starlink class, Amazon Leo Pro, Amazon Leo Ultra
    • Satellite, GEO (T3): Inmarsat GX (up to 80 Mbps down), MCX (up to 150 Mbps down), Ka band with TCP acceleration, Ku band with TCP acceleration
    • Home cable, DOCSIS 3.1, 1 Gig (Xfinity, Mediacom class)
    • Fiber, Verizon Fios 1 Gig (T2)
    • Custom

Router

  • Router, set to one of these models:
    • Generic (OPNsense, OpenWrt or other)
    • MikroTik hEX (RB750Gr3)
    • MikroTik hEX S (RB760iGS)
    • MikroTik L009UiGS-RM
    • MikroTik RB5009UG+S+IN
    • MikroTik CCR2004-1G-12S+2XS
    • Gogo SCS (Smart Cabin System, P28950), adds its built-in Wi-Fi (T3)
    • Satcom Direct SDR (1233-F-2191-10), adds its built-in Wi-Fi (T3)
    • Satcom Direct SD Hub (WiFi HUB 2.0, 900023), OpenWrt, adds its built-in Wi-Fi (T3)

Switch

  • Switch, set to one of these models:
    • Generic managed switch
    • NETGEAR GS305PP (unmanaged, 5 ports, 4 PoE+)
    • NETGEAR GS308PP (unmanaged, 8 ports, all PoE+)
    • NETGEAR GS308EPP (managed, 8 ports, all PoE+)
    • NETGEAR GS316EPP (managed, 16 ports + SFP, 15 PoE+)
    • NETGEAR MSM4310 (M4350-8M2V) (T2)
    • Antaira LMP-1600G-M12-67-24-T (T3)
    • AVDS Node, 8-slot, 3 Ethernet (100-0058-00) (T3)
    • AVDS Node, 7-slot, 3 Ethernet (100-0056-00) (T3)
    • AVDS Node, 4-slot, 3 Ethernet (100-0144-00) (T3)
    • Rockwell Collins HDAV-6000 (441-0102-100) (T3)

Access point

  • Access point, set to one of these models:
    • Generic access point
    • NETGEAR WAX210 / WAX210PA (Wi-Fi 6 AX1800)
    • Miltope nMAP2 (903920-1, integral antennas) (T3)
    • Miltope nMAP2 (903920-2, external antennas) (T3)
    • Astronics CabinAXe CWAP (700-00016-000, Wi-Fi 6E) (T3)
    • Built-in Wi-Fi of the Gogo SCS, Satcom Direct SDR and SD Hub (added with the router model) (T3)

Device and Device group

  • Device, set to one of these types:
    • Laptop
    • Phone
    • Tablet
    • Generic device
    • Raspberry Pi 4 (Wi-Fi 5, 1 stream)
    • ESP32-C6 (Wi-Fi 6, 2.4 GHz only)
    • FriendlyElec NanoPi Zero2 (Gigabit Ethernet, no onboard Wi-Fi)
    • Computer with NVIDIA ConnectX-4 Lx (2 × SFP28, 10GbE)
    • WLED lighting controller (wired Ethernet) (T2)
    • Any AV equipment type below
  • Device group (several identical devices)

Local server

  • Local server: cache, DNS, test server or MQTT broker (T2), on this hardware:
    • Generic computer
    • Teltonika RUTX10, MQTT broker (T3)

AV equipment

Places a Powersoft NOTA 142; choose the model under Device type. All Tier 3.

  • Powersoft NOTA 142 (AES67 PoE amplifier) (T3)
  • Neutrik NA-2I2O-DLINE (AES67/Dante, 2 line in, 2 line out) (T3)
  • Neutrik NA-2I-DLINE (AES67/Dante, 2 line in) (T3)
  • Neutrik NA-2O-DLINE (AES67/Dante, 2 line out) (T3)
  • Audinate Dante AVIO USB-C (2x2, computer or tablet) (T3)
  • Dolby CP950 (cinema processor, 16 channels AES67 out) (T3)
  • AES67 audio source (DSP, console) (T3)
  • Dante audio source (console, DSP, computer) (T3)
  • Apple TV 4K (Wi-Fi 7, Gigabit Ethernet) (T3)
  • Roku 4K (Roku Ultra: Wi-Fi 6, 10/100 Ethernet) (T3)
  • Rockwell Collins HDAV-6000 (441-0102-100): turns the item into the HDAV switch (T3)

Ethernet port

  • Maintenance or spare jack, 10/100, 10/100/1000 or 2.5G, with this jack:
    • Generic RJ45 jack
    • Ingenio AeroPuck (NG81-1000-011), PoE pass-through or Ethernet accessory (T3)

Obstruction

  • Panel, wall or person that weakens Wi-Fi